Premium Engineering Built to Factory Benchmarks
Welcome to the ultimate Wiper Motor & Linkage OE Cross-Reference Center. In modern automotive engineering, the visibility system is a critical safety component. A failing wiper motor or a worn-out linkage assembly can severely compromise driver safety during adverse weather conditions. That is why JX parts are engineered to meet or exceed original equipment (OE) specifications, ensuring a seamless fit and long-term durability.
Every JX wiper motor is a 1:1 OE replacement built to the factory benchmark of 12.5 N.m rated torque / 55 N.m stall torque / 1.5 million wiping cycles / IP66 ingress protection rating. Our parts require absolutely no modification during installation.
Finding the exact replacement part is simple and precise. Use this cross-reference center to locate your vehicle's OE number and map it to the corresponding high-performance JX SKU. By matching the original equipment manufacturer (OEM) part number, you guarantee restoring your windshield wiper system to its peak factory operating performance.
Fitment Verification Protocol
Before placing your order, please confirm fitment by verifying three critical criteria:
- OE Part Number: Must match the cross-reference list.
- Connector Pin Count: Verify the terminal plug configuration (e.g., 5-pin, 4-pin).
- Production Year: Confirm the exact vehicle model year range.
By adhering to this protocol, you eliminate compatibility issues and ensure a plug-and-play installation.
Technical Standards & Performance Benchmarks
Explore the rigorous engineering metrics that define the longevity, power, and environmental resilience of JX Wiper Motors and Linkages.
High-Torque Performance
Engineered with 12.5 N.m rated torque and a robust 55 N.m stall torque to clear heavy snow, ice, and torrential rain without binding or motor burnout.
Extended Life Cycle
Tested to sustain over 1.5 million wiping cycles. JX wiper motors are built with premium carbon brushes and hardened gears to ensure decade-long reliability.
IP66 Waterproof Seal
Featuring hermetically sealed housings and heavy-duty rubber gaskets to prevent water, salt, and road grime from infiltrating the electrical internals.
PA66+GF30 Linkages
Wiper linkages utilize PA66 polyamide reinforced with 30% glass fiber, providing superior mechanical strength and resistance to thermal deformation.
OE Cross-Reference Database
Search and match your original equipment manufacturer (OEM) part number with our corresponding JX SKU. All parts are designed as 1:1 direct drop-in replacements.
Audi OE Cross-Reference Table
| OE Number | Applicable Vehicles & Applications | JX SKU | Key Specifications / Parameters |
|---|---|---|---|
| 4L1910113 | Audi Q7 (4LB) 2006-2015 Front Wiper Motor | JX-FW-1001 | 12.5N.m / 1.5M Cycles / IP66 |
| 4L1955119 | Audi Q7 (4LB) 2006-2015 Front Wiper Motor (Interchangeable) | JX-FW-1001 | 12.5N.m / 1.5M Cycles / IP66 |
| 4L1955023C / 4L1955603 | Audi Q7 (4LB) Front Linkage Assembly | JX-LK-1003 | PA66+GF30 / 240h Salt Spray |
| 1J0955119A / 1J0955119B | Audi A3 (8L1) 1996-2003 Front Wiper Motor | JX-FW-1002 | 12.5N.m / 55N.m Stall / 1.5M Cycles |
| 8L0955711 | Audi A3 (8L1) Rear Wiper Motor | JX-RW-1004 | 10N.m / IP66 / 1.2M Cycles |
| 8E9955711A / 8E9955711E | Audi A4 / A6 Avant Rear Wiper Motor | JX-RW-1005 | 12.5N.m / 1.5M Cycles / IP66 |
| 4M0955711A | Audi Q7 (4M) / A4 (8W) 2015+ Rear Wiper Motor | JX-RW-1006 | ≤52dB / IP66 / 1.5M Cycles |
VW (Volkswagen) OE Cross-Reference Table
| OE Number | Applicable Vehicles & Applications | JX SKU | Key Specifications / Parameters |
|---|---|---|---|
| 1J0955119A / 1J0955119B / 1J0955119C | VW Golf IV / Bora 1997-2005 Front Wiper Motor | JX-FW-1002 | 12.5N.m / 55N.m / 1.5M Cycles |
| 1J1955113C | VW Golf IV / Bora Front Linkage Assembly | JX-LK-1007 | PA66+GF30 / 240h Salt Spray |
| 1J9955711 | VW Golf IV Rear Wiper Motor | JX-RW-1008 | 12.5N.m / IP66 |
| 3B9955711E | VW Passat Variant Rear Wiper Motor | JX-RW-1009 | 12.5N.m / 1.5M Cycles |
| 3C1955119 | VW Passat B6 2006-2010 Front Wiper Motor | JX-FW-1010 | 12.5N.m / IP66 |
| 1K6955711B | VW Golf V / Passat Rear Wiper Motor | JX-RW-1011 | 12.5N.m / IP66 / 1.5M Cycles |
| 6Q1955113A / 6Q1955119A | VW Polo 9N Front Wiper Motor | JX-FW-1012 | 12.5N.m / 40W / IP66 |
| 6R1955119A | VW Jetta MK6 2011-2018 Front Wiper Motor | JX-FW-1013 | 12.5N.m / 1.5M Cycles / IP66 |
| 2D1955603 | VW LT / Mercedes Sprinter Front Linkage Assembly | JX-LK-1014 | 12.5N.m / 240h Salt Spray |
BMW OE Cross-Reference Table
| OE Number | Applicable Vehicles & Applications | JX SKU | Key Specifications / Parameters |
|---|---|---|---|
| 61617194029 | BMW 5 Series E60/E61/E63 Front Wiper Motor | JX-FW-1015 | 55N.m Stall / 1.5M Cycles / IP66 |
| 61617200510 | BMW X5 E70 2007-2013 Front Wiper Motor | JX-FW-1016 | 12.5N.m / 1.5M Cycles / IP66 |
| 61618229216 | BMW Mini R50/R52/R53 Front Wiper Motor + Linkage | JX-FW-1017 | 12.5N.m / 1.5M Cycles |
| 67636917907 / 6917907 | BMW X3 E83 2004-2010 Rear Wiper Motor | JX-RW-1018 | ≤52dB / IP66 / 1.5M Cycles |
Mercedes-Benz OE Cross-Reference Table
| OE Number | Applicable Vehicles & Applications | JX SKU | Key Specifications / Parameters |
|---|---|---|---|
| 6398200408 / A6398200408 | Mercedes Vito / Viano W639 2003-2014 Rear Wiper Motor | JX-RW-1019 | 40W / 12.5N.m / 1.5M Cycles |
| 2518200042 | Mercedes GL450/R350/ML550 (X164) 2006-2012 Rear Wiper Motor | JX-RW-1020 | 40W / IP66 / 1.2M Cycles |
Toyota OE Cross-Reference Table
| OE Number | Applicable Vehicles & Applications | JX SKU | Key Specifications / Parameters |
|---|---|---|---|
| 85110-47100 / 85110-47190 | Toyota Prius 2010-2016 Front Wiper Motor | JX-FW-1021 | 12.5N.m / IP66 / 1.5M Cycles |
| 85110-60370 | Toyota Hiace Front Wiper Motor | JX-FW-1022 | 12.5N.m / IP66 |
| 85110-0D030 | Toyota Land Cruiser Front Wiper Motor | JX-FW-1023 | 12.5N.m / 55N.m / IP66 |
| 85110-02330 | Toyota Auris Front Wiper Motor | JX-FW-1024 | 12.5N.m / 1.5M Cycles / IATF 16949 |
Renault OE Cross-Reference Table
| OE Number | Applicable Vehicles & Applications | JX SKU | Key Specifications / Parameters |
|---|---|---|---|
| 8200036921 / 7701207739 | Renault Megane II 2000-2009 Front Wiper Motor + Linkage | JX-FW-1025 | 12.5N.m / 1.5M Cycles |
| 287100004R | Renault Laguna III 2007-2015 Rear Wiper Motor | JX-RW-1026 | 12.5N.m / ≤55dB |
| 7701052465 / 7701207936 | Renault Twingo 2007-2014 Front Wiper Motor | JX-FW-1027 | 12.5N.m / IP66 |
| 7701050898 / 7701044526 | Renault Master II Front Wiper Motor | JX-FW-1028 | 40W / 12.5N.m / 1.5M Cycles |
| 7701206549 | Renault Megane I Front Wiper Motor | JX-FW-1029 | 12.5N.m / IP66 |
| 288603753R / 288100678R | Renault Clio MK4 2012-2019 Front Wiper Motor Assembly | JX-FW-1030 | 12.5N.m / IP66 / 1.5M Cycles |
Fiat / Lancia / Alfa Romeo OE Cross-Reference Table
| OE Number | Applicable Vehicles & Applications | JX SKU | Key Specifications / Parameters |
|---|---|---|---|
| 51791408 / 51850871 | Fiat 500 / 500C 2007+ Rear Wiper Motor | JX-RW-1031 | 12.5N.m / IP66 |
| 46829571 / 51846837 | Fiat Panda 2003-2013 Rear Wiper Motor | JX-RW-1032 | ≤52dB / 1.5M Cycles / IP66 |
| 51792290 / TGL350L | Fiat Bravo II 2007-2014 Rear Wiper Motor | JX-RW-1033 | 12.5N.m / 1.5KG Aluminum Housing |
| 77364424 / 77362587 | Fiat 500 / Bravo / Lancia Delta Front Wiper Motor | JX-FW-1034 | 12.5N.m / IP66 |
| 9948873 / 9945855 / 99488730 | Fiat Ducato Front Wiper Motor | JX-FW-1035 | 12.5N.m / 55N.m / IP66 |
| 9949141 / 9948679 | Alfa Romeo 156 1997-2005 Front Wiper Motor | JX-FW-1036 | 12.5N.m / IP66 / 1.5M Cycles |
Opel / Vauxhall / Chevrolet OE Cross-Reference Table
| OE Number | Applicable Vehicles & Applications | JX SKU | Key Specifications / Parameters |
|---|---|---|---|
| 1270232 / 22085493 | Opel Astra F / Combo / Corsa B Front Wiper Motor | JX-FW-1037 | 12.5N.m / 1.5M Cycles / IP66 |
| 1270000 / 23001902 | Opel Corsa C 2000-2009 Front Wiper Motor | JX-FW-1038 | 55N.m Stall / 1.5M Cycles |
| 1273027 / 9117722 | Opel Astra G / Vectra B Front Wiper Motor | JX-FW-1039 | 12.5N.m / IP66 |
| 95323223 / 95915118 | Opel Mokka / Chevrolet Trax Front Wiper Motor | JX-FW-1040 | 12.5N.m / IP66 |
Seat / Skoda OE Cross-Reference Table
| OE Number | Applicable Vehicles & Applications | JX SKU | Key Specifications / Parameters |
|---|---|---|---|
| 6L6955711D / 579604 | Seat Ibiza III 1999-2002 Front Wiper Motor | JX-FW-1041 | 12.5N.m / 1.5M Cycles / IATF 16949 |
| 5P0955120B / 5P0955119B | Seat Altea XL Front Wiper Motor | JX-FW-1042 | 12.5N.m / IP66 / ±5% |
| 6K1955313C / 6K1955313A | Seat Cordoba / Ibiza Front Linkage Assembly | JX-LK-1043 | High-Strength Steel / 240h Salt Spray |
| 6J3955711 | Seat Ibiza 2006-2016 Rear Wiper Motor | JX-RW-1044 | 12.5N.m / IP66 |
| 5J1955023A / 5J1955023C | Skoda Fabia 2006-2014 Front Wiper Motor | JX-FW-1045 | 12.5N.m / 1.5M Cycles / IP66 |
| 5J9955711A / 5J9955711B | Skoda Fabia MK2 Rear Wiper Motor | JX-RW-1046 | ≤52dB / IP66 / 1.5M Cycles |
| 1Z2955119D | Skoda Octavia Estate 2012 Front Wiper Motor | JX-FW-1047 | 12.5N.m / 1.5M Cycles / IP66 |
| 6Q1955113A | Skoda Fabia I Front Wiper Motor | JX-FW-1012 | 40W / 12.5N.m / IP66 |
Other Brands (Chrysler / Nissan / Peugeot / Buick / Saab / Machinery)
| OE Number | Applicable Vehicles & Applications | JX SKU | Key Specifications / Parameters |
|---|---|---|---|
| 5101863AA | Chrysler Sebring / Dodge Stratus II Front Wiper Motor | JX-FW-1048 | 40W / 12.5N.m / 1.5M Cycles |
| 28800-JD900 | Nissan Qashqai J10 Front Wiper Motor + Linkage | JX-FW-1049 | 12.5N.m / 55N.m / IP66 |
| 640589 / 53545802 | Peugeot 306 Front Wiper Motor | JX-FW-1050 | 12.5N.m / 5Pin / IP66 |
| 6405L9 / 6405-L9 | Peugeot 307 SW / Break Rear Wiper Motor | JX-RW-1051 | 12.5N.m / 48N.m Stall / IP66 |
| 9009598 / 5485174 | Buick GL8 2000-2010 Front Wiper Motor | JX-FW-1052 | 12.5N.m / 1.5M Cycles / IP66 |
| 22888505 | Buick Envision 2015-2021 Front Wiper Motor | JX-FW-1053 | 12.5N.m / IP66 / 1.5M Cycles |
| 5485239 | Buick Excelle 2010-2015 Front Wiper Motor | JX-FW-1054 | 12.5N.m / 55N.m / IP66 |
| 96893302 | Chevrolet Cruze 2011-2016 Front Wiper Motor | JX-FW-1055 | 12.5N.m / 1.5M Cycles / IP66 |
| 43-2904 / AA1432904 | Saab 9-3 2003-2012 Front Wiper Motor | JX-FW-1056 | 40W / 12.5N.m / 1.5M Cycles |
| 8511033270 / 8515033190 | Multi-Brand Universal Front Linkage Assembly | JX-LK-1057 | High-Strength Steel / 240h Salt Spray |
| 37GL10X4-41010 | Construction Machinery / Special Vehicle Wiper Motor | JX-FW-1058 | 24V / 12.5N.m / IP66 |
The Ultimate Guide to Wiper Motor & Linkage Selection
Avoid common ordering mistakes by implementing our step-by-step verification protocol to guarantee a perfect mechanical and electrical fit.
1. Locate and Verify the OE Part Number
The Original Equipment (OE) number is the most reliable identifier for automotive parts. It is typically stamped, printed, or engraved on the metal body of the wiper motor or molded onto the linkage frame. If the label is illegible, you can contact your local vehicle dealership with your VIN (Vehicle Identification Number) to retrieve the official OE number.
Pro Tip: Many European vehicles (such as Audi, VW, and BMW) share parts across platforms. For example, the JX-FW-1002 fits both Audi A3 and VW Golf IV. Always cross-reference the OE number to ensure that the internal gear ratio and wiring layout match your vehicle's computer system.
2. Verify the Connector Pin Count & Layout
A very common error is purchasing a wiper motor that physically fits the bracket but has a different electrical connector. Different trim levels, regional specifications, or mid-year production updates can alter the wiring harness. A motor might have a 4-pin, 5-pin, or even a 6-pin connector depending on the speed settings, delay functions, and rain sensor integration.
Before purchasing, disconnect your vehicle's old wiper motor harness and count the metal pins inside the plug housing. Make sure it matches the pin count of the JX SKU you are ordering. This prevents electrical issues and dashboard error codes.
3. Check the Vehicle Production Year
Automotive manufacturers frequently update components mid-generation. A vehicle model registered in 2015 might use a pre-facelift wiper motor or a post-facelift motor depending on the exact build date. Always check the manufacturing date plate (usually located on the driver's side door jamb or under the hood) rather than relying solely on the registration year.
Our database lists exact year ranges (e.g., Audi Q7 2006-2015). If your vehicle was manufactured on the border of a model transition, double-checking the OE number is crucial.
4. Zero Modifications Required
With JX parts, you do not need to splice wires, bend brackets, or drill new holes. Every motor and linkage is built as a 1:1 replica of the factory original. The mounting tabs, drive shaft splines, electrical connectors, and linkage arm sweeps are exactly identical to the original equipment.
This strict adherence to factory dimensions guarantees a straightforward installation process, reducing labor time and eliminating mechanical stress on the wiper linkage and firewall.
Advanced Materials & Testing Standards
Wiper linkages and motors are exposed to harsh environments, including extreme heat under the hood, sub-zero winter temperatures, road salt, and constant moisture. To survive these conditions, JX parts are built using high-grade materials and subjected to extensive lab testing.
PA66+GF30 Glass-Fiber Reinforced Polyamide
Our wiper linkages utilize PA66+GF30 for critical structural joints and bushings. By reinforcing Polyamide 66 with 30% glass fiber, we achieve a material that has excellent tensile strength, high rigidity, and resistance to creep. This prevents the linkage arms from bending or snapping under heavy loads, such as when clearing heavy snow from the windshield.
240-Hour Salt Spray Testing
To prevent rust and corrosion, all steel components in JX linkage assemblies are coated with a protective zinc-plated or electrophoretic finish. We subject these parts to a rigorous 240-hour salt spray test (in accordance with ASTM B117 standards). This testing simulates years of exposure to salty winter roads, ensuring that the linkage joints remain smooth and rust-free throughout their operational life.
Acoustic Engineering & Noise Control
A noisy wiper motor can be highly distracting to the driver. JX motors are acoustically engineered to operate at noise levels ≤52dB. This is achieved by precision-grinding the internal worm gear shafts, using high-quality dampening materials, and ensuring perfect balancing of the armature assembly. You get quiet, smooth, and reliable operation every time.
Why 12.5 N.m Rated Torque Matters
The rated torque of 12.5 N.m represents the continuous operating power of the motor. Under normal rain conditions, a lower-torque motor might suffice, but when facing high aerodynamic drag at highway speeds, heavy downpours, or sticky mud, a motor with insufficient torque will slow down or stall. JX motors maintain consistent wiping speeds regardless of external resistance.
Understanding 55 N.m Stall Torque
Stall torque is the maximum torque the motor can generate before stopping completely. A high stall torque of 55 N.m ensures that if the wiper blades become temporarily blocked by ice or debris, the motor has enough reserve power to break through the obstruction without overheating or burning out the internal electrical windings.
Symptoms of a Failing Wiper System
Learn how to diagnose issues with your wiper motor or linkage so you can perform timely maintenance and restore safe driving visibility.
Wipers Moving Slowly or Erratically
If your wipers move slower than usual, stutter across the glass, or fail to change speeds when you adjust the switch, the motor's internal electrical contacts may be worn out, or the gears may be stripping. A drop in motor efficiency can also indicate water intrusion into the motor housing, leading to internal corrosion.
Wipers Do Not Move but Motor Hums
If you turn on the wipers and hear a humming sound from the cowl area, but the wiper blades do not move, the wiper motor is receiving power, but the mechanical linkage (transmission) is likely broken or disconnected. The linkage joints can wear down over time, causing the linkage rods to pop off their ball studs.
Wipers Park in the Wrong Position
Wiper motors have an internal park switch that tells the vehicle's computer when the wipers have reached the bottom of the windshield. If your wipers stop in the middle of the windshield or park vertically when turned off, the park switch inside the gear cover has failed, requiring a complete motor replacement.
Grinding or Squeaking Noises
Loud grinding or clicking noises during wiper operation indicate stripped gears inside the motor's gearbox or dry, seized pivots in the linkage assembly. Continuing to operate the system under these conditions will quickly burn out the motor due to excessive mechanical resistance.
Step-by-Step Wiper Motor & Linkage Replacement Guide
Replacing a wiper motor or linkage is a task that can be completed with basic hand tools. Follow this general outline to ensure a safe and successful installation:
- Disconnect the Battery: Before starting any electrical work, disconnect the negative battery terminal to prevent accidental short circuits or injury from moving wiper parts.
- Remove the Wiper Arms: Remove the protective caps at the base of the wiper arms, loosen the retaining nuts, and use a wiper arm puller tool to gently release the arms from the splined shafts.
- Remove the Plastic Cowl Cover: Remove the plastic clips or screws securing the weather stripping and plastic cowl cover at the base of the windshield. Carefully lift the cowl cover to expose the wiper motor and linkage assembly.
- Unplug the Electrical Connector: Press the locking tab on the wire harness plug and disconnect it from the wiper motor. Inspect the plug for any signs of corrosion or damage.
- Unbolt the Assembly: Remove the mounting bolts securing the linkage assembly to the firewall. Carefully lift the complete motor and linkage assembly out of the vehicle.
- Transfer or Replace Components: If you are replacing only the motor, unbolt it from the linkage frame. If you are replacing the entire assembly, mount the new JX motor and linkage into place.
- Reinstall and Test: Secure the assembly with the mounting bolts, reconnect the wiring harness, and temporarily reconnect the battery. Turn on the wiper switch to let the motor run and return to its natural "park" position before reinstalling the wiper arms. This ensures the blades park correctly at the bottom of the glass.
Crucial Safety Warnings
Never touch the linkage arms while the motor is connected and operating. The mechanical leverage of a wiper linkage can exert hundreds of pounds of force, which can easily cause severe injury to your fingers.
Always protect your windshield. When the wiper arms are removed, the spring-loaded metal wiper posts can snap back against the glass and crack it. Place a folded towel or protective pad over the windshield glass during the entire procedure.
Ensure correct torque specs. When reinstalling the wiper arm nuts, do not overtighten them, as you can strip the soft aluminum threads on the drive post. Tighten them firmly to ensure they do not slip under load.
Frequently Asked Questions
Get answers to common queries regarding wiper motor selection, cross-referencing, and warranty coverage.
How do I know if I need to replace the motor or just the linkage?
If you hear the motor running but the wipers do not move, the linkage is likely broken or has popped off its socket. If there is no sound at all and the fuse is good, the motor has likely failed. In many cases, replacing both as an assembly (like JX-FW-1017 or JX-FW-1025) is recommended to prevent future issues.
Do JX wiper motors come pre-greased?
Yes, all JX wiper motors are pre-lubricated with high-grade, temperature-resistant synthetic grease on the internal worm gears. No additional lubrication is required during installation.
What does the IP66 rating mean for a wiper motor?
IP66 indicates that the motor housing is completely dust-tight and protected against powerful water jets. This prevents rain, melting snow, and road salt spray from entering the motor casing and causing electrical short circuits or corrosion.
Why is the pin count on the electrical connector so important?
The pin count corresponds to the different speeds (low, high, intermittent), the park switch circuit, and ground. A mismatched pin count will prevent the motor from communicating correctly with the vehicle's body control module (BCM), resulting in loss of functionality.
Can I use these motors on right-hand drive (RHD) vehicles?
Some wiper motors and linkages are specific to Left-Hand Drive (LHD) or Right-Hand Drive (RHD) vehicles due to the sweep direction and mounting orientation. Please check the vehicle application notes in our cross-reference database or contact our support team to verify RHD compatibility.